OMINAISUUDET

OMINAISUUDET

Cylinder Head Ready for High-Lift Cams

Cylinder Head Ready for High-Lift Cams

Previously a feature unique to the Ninja ZX-10RR, now the cylinder head of all models provides the clearance to accommodate race-kit high-lift cams.  * Race-kit high-lift cams and valve springs offer increased high-rpm performance.  

Kawasaki Quick Shifter

Kawasaki Quick Shifter

Dual-direction KQS is now standard equipment on all models.  * Dual-direction KQS system allows both clutchless upshifts and downshifts, facilitating circuit riding. * Designed for effective sport riding, KQS can also be used on the street at rpm above 2,500 min-1.

Finger-follower valve actuation

Finger-follower valve actuation

A change to finger-follower valve actuation and other updates increase the Ninja ZX-10R SE’s engine performance.  Peak horsepower is higher: now 203 PS, which can easily be augmented care of a full race exhaust.  However, the changes benefit performance across the rev range, delivering increased power at all rpm – an advantage for racers as well as World Superbike teams.  The changes essentially raise the flat torque curve of the previous model, so the Ninja ZX-10R SE’s easy-to-use character is maintained while offering increased power.

Electronic throttle valves

Electronic throttle valves

Electronic throttle valves allow the ECU to deliver the ideal amount of fuel and air to the engine. The system also enables more precise control of S-KTRC, as well as implementation of systems like KLCM and Kawasaki Engine Brake Control.

Bosch IMU (Inertia Measurement Unit)

Bosch IMU (Inertia Measurement Unit)

Compact IMU operates in 6 DOF (degrees of freedom): 5 measured + 1 calculated. Combined with Kawasaki’s proprietary dynamic modelling program, input from the IMU enables even more precise chassis orientation awareness, the key to bringing Kawasaki’s electronics to the next level.

Swingarm with optimised rigidity

Swingarm with optimised rigidity

Designed using Kawasaki’s advanced dynamic rigidity analysis and a from-the-outside-in approach, swingarm with optimised rigidity contributes to nimbler handling

Track-focused 998 cm3 liquid-cooled, 4-stroke In-line Four

Track-focused 998 cm3 liquid-cooled, 4-stroke In-line Four

All-new in 2011, the Ninja ZX-10R’s engine balanced stunning power with manageability, and facilitated getting back on the gas by moving peak torque higher up in the rpm range. The new engine maintains this essential character, but offers a stronger low-mid range for increased acceleration coming out of corners. 

High-performance Brembo Brake System

High-performance Brembo Brake System

Dual high-spec Brembo M50 monobloc calipers gripping larger ø330 mm discs, specially prepared radial-pump master cylinder and race-quality steel-braided lines deliver next-level braking performance.

Aerodynamic bodywork

Aerodynamic bodywork

Larger upper cowl cuts through the air more efficiently, and offers the rider greater wind protection, making it easier to shift position for corner entry when riding on the track.

Cassette transmission

Cassette transmission

Race-style cassette transmission facilitates gear ratio changes to suit track conditions. The “cassette” is located high enough that it can be accessed without having the engine oil drain out.

High-visibility instrumentation

High-visibility instrumentation

The centrepiece of the Ninja ZX-10R’s instrument panel is the highly visibly LED-backlit bar-graph tachometer.

Highly Durable Paint

Highly Durable Paint

Kawasaki’s new Highly Durable paint features a special coat that allows scratches to repair themselves, enabling the paint to maintain its high-quality finish†.  * Soft and hard segments in the coat work together like a chemical spring, creating a trampoline effect that allows impacts to be absorbed.  † Notes: 1. In some cases, it takes about one week for recovery. 2. The paint will not recover in the case of scratches caused by a coin or key, or zip fasteners.  

Titaaninen pakoputki

Titaaninen pakoputki

Titaaninen äänenvaimennin tehostaa moottorin suorituskykyä ja on kevyt.

Aluminium twin-spar frame

Aluminium twin-spar frame

Revised geometry care of a steering head moved closer to the rider, and a longer swingarm put more weight on the front for increased corner entry stability and confidence on the circuit.

Electronic steering damper

Electronic steering damper

Specially developed Öhlins electronic steering damper
provides just the right amount of damping based on vehicle speed and degree of acceleration or deceleration. Revised settings were optimised for the racetrack and winding roads.

Cornering management function

Cornering management function

Feedback from the IMU enables the addition of a new function. The new cornering management function uses KIBS and S-KTRC to assist riders in tracing their intended line through the corner.

TEKNOLOGIA

KIBS-jarrujärjestelmä

KIBS-jarrujärjestelmä

Kawasaki on kehittänyt Supersport-pyöriin KIBS-jarrujärjestelmän parantaakseen hidastuvuutta jarrutuksessa.

LUE LISÄÄ
ABS-jarrujärjestelmä

ABS-jarrujärjestelmä

ABS-järjestelmä estää etu-ja takapyörän lukkiutumisen jarruttaessa liukkaalla tienpinnalla tai kovassa jarrutuksessa ja helpottaa kuljettajaa hallitsemaan pyörää.

LUE LISÄÄ
Vaakatasoinen takajousitus

Vaakatasoinen takajousitus

Takajousituksessa vaimennusyksikkö on takahaarukan yläpuolella vaakatasossa. Sijoituksella saadaan enemmän tilaa suuremmalle äänenvaimentimen esikammiolle, jolloin voidaan käyttää pienempikokoisia äänenvaimentimia.

LUE LISÄÄ
KECS-Kawasaki Electronic Control Suspension

KECS-Kawasaki Electronic Control Suspension

KECS (Kawasaki Electronic Control Suspension) adapts to road and riding conditions in real time, providing the ideal amount of damping called for. 

LUE LISÄÄ
KQS - Kawasaki Quick Shifter

KQS - Kawasaki Quick Shifter

KQS (Kawasaki Quick Shifter) enables clutchless up- and downshifts.

LUE LISÄÄ
KLCM - Kawasaki Launch Control Mode

KLCM - Kawasaki Launch Control Mode

KLCM (Kawasaki Launch Control Mode) optimises acceleration from a stop by electronically managing engine output to prevent wheelspin.

LUE LISÄÄ
KCMF

KCMF

KCMF (Kawasaki Cornering Management Function) monitors engine and chassis pnarameters throughout the corner.

LUE LISÄÄ
Kawasaki Engine Brake Control

Kawasaki Engine Brake Control

Kawasaki Engine Brake Control allows riders to set engine braking according to preference. 

LUE LISÄÄ
IMU

IMU

Combined with Kawasaki’s proprietary dynamic modelling program, input from the IMU (Inertial Measurement Unit) enables even more precise chassis orientation awareness, the key to bringing Kawasaki’s electronics to the next level.

LUE LISÄÄ
Electronic Throttle Valves

Electronic Throttle Valves

Electronic Throttle Valves allow the ECU to deliver the ideal amount of fuel and air to the engine.

LUE LISÄÄ
S-KTRC 3-valintainen luistonesto

S-KTRC 3-valintainen luistonesto

S-KTRC maksimoi eteenpäin vievän liikkeen estäen renkaan pidon menettämisen.

LUE LISÄÄ
Tehonvalintajärjestelmä

Tehonvalintajärjestelmä

Tehonvalintajärjestelmä antaa kuljettajille mahdollisuuden valita tehon, joka vastaa parhaiten ajo-olosuhteita. Matalan tehon ohjelma tarjoaa 75 % maksimitehosta ja pehmeämmän kaasunvasteen.

LUE LISÄÄ
Taloudellisen ajon merkkivalo

Taloudellisen ajon merkkivalo

Moottorinohjausyksikkö kontrolloi polttoaineensyöttöä ja taloudellisen ajon ECO-merkkivalo ilmaisee, kun ajo on taloudellisinta.

LUE LISÄÄ